High-Visibility Multinorm Work Coverall FR-LR11657

High-Visibility Multinorm Work Coverall FR-LR11657

High-Visibility Multinorm Work Coverall FR-LR11657 provides protection from rain and wind. Breathable material allows water vapour to escape, helping reduce the feeling of dampness as you move. Taped seams help prevent water from entering through the joins in the fabric.

High-visibility material helps make the wearer more noticeable at work. The protective class is listed in the specifications. Two zipped side pockets keep small essentials close and help prevent them from falling out. Hook-and-loop sleeve adjustments let you tailor the fit around your wrists.

Features:

• Belt loops.
• Sleeves with velcro adjustments.
• Ventilation at back.
• Two side pockets with zipper.
• One chest pocket with zipper.
• Elastic sides in waist.
• Hidden two-way zipper on the side of the legs.
• Loop for walkie / gas detector or similar.
• Inside chest pocket with zipper.
• Two back pockets.
• Detachable hood with zipper and elastic drawstring.
• Hidden chest pocket with zipper.
• Two-way zipper under double storm flap with velcro closure.

Areas of use

For work where the risk assessment requires the listed protective standards. Suitability for welding, heat, chemicals or electric arcs depends on the certified classes of the selected version.

Material Composition and Technical Specifications

• Material composition: 98% Polyester, 2% Carbon Grid, 270 g/m² Lining: 100% FR Cotton, 180 g/m²
• Construction and features: Breathable, wind and waterproof with taped seams
• Water resistance: ≥13,000 mm
• Breathability: 5,000 g/m²/24 h
• Colours: Hi-Vis Red / Saturn Yellow
• Sizes: S, M, L, XL, XXL, 3XL, 4XL
• Product weight: 2 kg (supplier specification)
• Care: Do not bleach; Do not dry clean; Do not iron; Do not tumble dry; Wash at max 40 °C
• Manufacturer: Lyngsøe Rainwear
• Standards and classes: EN 1149-5; EN 343 - 3,3,X; EN ISO 20471 - 3; EN ISO 14116 - Outer 1 Inner 3; EN 13034 - TypeBP6

Standard Description

EN 343 This standard sets requirements for protective clothing used in rain and wet conditions. It assesses resistance to water penetration through materials and seams, as well as water vapour resistance.

EN 1149-5 This standard sets requirements for electrostatic dissipative protective clothing. Its purpose is to reduce the risk of incendiary electrostatic discharges. The garment is used as part of an appropriate protective system.

EN ISO 14116 This standard assesses limited flame spread in clothing materials. Performance is expressed by the index stated for the product. This marking alone does not establish protection against every type of heat hazard.

EN ISO 20471 This standard sets requirements for high-visibility clothing. Fluorescent materials and reflective elements improve conspicuity in daylight and when illuminated in darkness. The class also depends on their surface area; use the rating stated for the selected version.

EN 13034 This standard covers limited protection against liquid chemicals. The stated type distinguishes whole-body protection from protection of specific body parts. Suitability depends on the chemical and the exposure conditions.

The listed classes apply to the selected version. Follow the manufacturer’s instructions.

Collection Description

High-Visibility Multinorm Work Coverall FR-LR11657 is part of the WOVEN ANTIFLAME HI-VIS range from Lyngsøe Rainwear. The range includes workwear with limited flame spread. Additional protective properties vary between models and are stated for each product. Consider the standards of all components when assembling your workwear.

For more guidance on choosing work equipment, visit Expert Advice.